Interruptor seccionador DX³ -IS -con disparo a distancia - 4P -400 V~- 100A -6 módulos
DX³
LEGRAND
Interruptor seccionador DX³ -IS -con disparo a distancia - 4P -400 V~- 100A -6 módulos
REF. 406546
EAN.
3245064065467
Interruptor seccionador con disparo - Categoría de empleo AC 22A y AC 23A (AC 22A para 125 A) según EN 60947-3 - Cubretecla rojo - Disparo a distancia con auxiliar de mando asociado - Tetrapolar 400 V~ - In: 100A - Número de módulos: 6.
Garantía 2 años
Familia de precios : 1106
397,05 €
/
1 piece
Precio recom.
Sin IVA
Compartir
Sólo puedes comparar 4 productos, tienes que eliminar uno para añadir este.
Características técnicas
| Version as main switch | Yes |
|---|---|
| Version as maintenance-/service switch | Yes |
| Version as safety switch | Yes |
| Version as emergency stop installation | Yes |
| Version as reversing switch | No |
| Max. rated operation voltage Ue AC | 415 V |
| Rated operating voltage | 48-415 V |
| Rated permanent current Iu | 100 A |
| Rated permanent current at AC-21, 400 V | 100 A |
| Rated short-time withstand current lcw | 1 kA |
| Rated operation power at AC-23, 400 V | 40 kW |
| Number of poles | 4 |
| Number of auxiliary contacts as normally closed contact | 0 |
| Number of auxiliary contacts as normally open contact | 0 |
| Number of auxiliary contacts as change-over contact | 3 |
| Motor drive optional | Yes |
|---|---|
| Motor drive integrated | No |
| Voltage release optional | Yes |
| Device construction | Complete device in housing |
| Suitable for floor mounting | Yes |
| Suitable for front mounting 4-hole | Yes |
| Suitable for front mounting centre | No |
| Suitable for distribution board installation | Yes |
| Suitable for intermediate mounting | No |
| Colour control element | Red |
| Type of control element | Toggle |
| Interlockable | Yes |
| Type of electrical connection of main circuit | Screw connection |
| Degree of protection (IP), front side | IP20 |
Documentación
4 documentos
Manual de uso
Hoja técnica
Declaración de construcción
Hoja técnica
1 documento
3D Autocad
1 documento
Certificado
OC / CB-IT-22484
(0.15 Mo)
SELECCIONAR UNA ACCIÓN